• 162804425

Pneumatic nailing gun _ pneumatic nailing gun usage

Pneumatic screw gun usage

Pneumatic nailing gun is mainly used for wooden pallets, wooden packing boxes, cable trays or heavy frame production, as well as some large furniture combination and wooden roof, board and concrete nailing can also be used. The air compressor should be used first. The compressed air pressure supplied by the air compressor should be sufficient (0.65Mpa). After the nail gun is loaded, the air compressor is connected to the nail gun with the air pipe.

 

What’s wrong with pneumatic nail gun?

There are several possibilities for pneumatic nail rolling gun:

1, the air pressure is not enough, need to check whether the air pressure is enough.

2, nails are not standard, the use of non-standard nails will appear card not nail phenomenon.

3, push the nail spring failure, can not effectively push the nail up.

4. Pushing nail claw has been worn and needs to be replaced.

These phenomena, in addition to the problem of nails, need to be repaired and replaced by a professional repair shop.

How many nails can pneumatic nail gun be installed at one time?

There are several possibilities for pneumatic nail rolling gun:

1, the air pressure is not enough, need to check whether the air pressure is enough.

2, nails are not standard, the use of non-standard nails will appear card not nail phenomenon.

3, push the nail spring failure, can not effectively push the nail up.

4. Pushing nail claw has been worn and needs to be replaced.

These phenomena, in addition to the problem of nails, need to be repaired and replaced by a professional repair shop.

How many nail guns are there for woodworking? Is the pneumatic nail gun available?

Straight nail guns are often used in decoration, drawing, flooring and panel projects. Furniture manufacturing for kitchen cabinets, combined furniture, etc., the following several specifications;

 

Of course, pneumatic nail gun can be used, now introduce two specifications;

CIP coil nail air nail gun (CN80E)

CN80E screw gun length: 310㎜ width: 128㎜ high: 318㎜ weight: 3.6㎏ apply to the scope of screw: naked nails, screw threads, ring nails apply to the length of the screw: 45 ~ 7

Air nail gun with coil nail (CN70E)

CN70E type coil air nail gun * air pressure 5 ~ 7 (kg / ㎝) * nail length range 45 ~ 70 (mm) * nail quantity 200 ~ 400 (pieces/roll) * pipe joint specification 1/4 “NPT

What’s wrong with pneumatic nail gun?

There are several possibilities for pneumatic nail rolling gun:

1, the air pressure is not enough, need to check whether the air pressure is enough.

2, nails are not standard, the use of non-standard nails will appear card not nail phenomenon.

3, push the nail spring failure, can not effectively push the nail up.

4. Pushing nail claw has been worn and needs to be replaced.

These phenomena, in addition to the problem of nails, need to be repaired and replaced by a professional repair shop.

 

Notes on the use of air nail gun for woodworking. Urgent urgent!!!

Note:

1: Woodworking gas nail gun is suitable for general air compressor, the pressure is adjusted to 0.45-0.75MPa.

2: with a three-piece set of air supply device (air filter, air regulator, lubricating oil) to obtain clean, dry, stable and lubricated compressed air, can increase the life of the tool.

3: Before use every day, drop 2-3 drops of lubricating oil from the joint to keep the internal parts lubricated, increase the working efficiency and the life of the gun.

4: different materials and different lengths of nails, need different operating pressure.

5: The gun body is equipped with safety safety device. When using, the gun nozzle is pressed down on the working object, and then the trigger is buckled.

6: all piping system must have no leakage phenomenon, in order to stabilize the pressure.

7: It is best to wear goggles when operating to ensure safety.

8: the operating pressure can not exceed 0.8Mpa, do not operate the nail gun without nails, so as to avoid premature damage of the nail gun.

9: Do not aim the muzzle of the gun at yourself or others to avoid causing injury.

10: Do not nail in the air, because the nail may harm the user or others, and will cause damage to the nail gun.

 

Extended Information:

The nail gun is introduced

Introduction: There are electric nail gun, pneumatic nail gun, gas nail gun, manual nail gun, etc. Pneumatic nail gun is also called pneumatic nail machine, air nail gun to air pump (air compressor) produced air pressure, small gun air pressure (4-6.5kg/C square meters (BAR)) big nail gun air pressure (5-8kg/C square meters (BAR)) body as power source, high pressure gas drive the nail in the cylinder of the nail gun to do hammer movement, the row of nails in the nail clamp nail into the object or the row of nails shot out.

Structure: front exhaust and rear exhaust.

Working principle: the gun body assembly is composed of the gun body, cylinder, balance valve, switch assembly, firing pin assembly (gun tongue), cushion cushion, gun nozzle, gun groove, etc., using compressed air and atmospheric pressure difference, through the trigger switch to make firing pin (piston) reciprocating motion in the cylinder; The clip part is composed of a gun head, a gun cover, a fixed clip, a movable clip and other accessories. The nail is sent to the groove of the gun cover through a pressure spring or a tension spring. When the firing pin comes out of the gun mouth, the nail is hit.

Type of nail gun: roll nail gun, plastic row nail gun, code nail gun, straight nail gun, mosquito nail gun, C-shaped grab, buckle gun, brown cloth grab, clip code nail gun, spring fixed gun, etc.

Reference: Baidu Encyclopedia – nail gun

Is Pneumatic Nail Roll Gun Easy to Maintain?

Pneumatic nail roll gun if it is only easy to change the gun needle, can be replaced by themselves. Just if it is used for a long time, it is recommended to return to the factory for better maintenance. After the machine is used for a long time, not only the needle, but also other parts may be lost. It should be checked by professional maintenance personnel to see it. Use after comprehensive overhaul, lest delay too much production time.


Post time: Apr-07-2021